Find Cell Towers
Find Cell Phone Frequency
Cell Phone Test Modes
Why Wilson Electronics?
Wilson vs. Competition
Cell Phone Booster & Repeater FAQs
How to boost a cell phone signal in a building
FCC Cell Signal FAQ's
NTSB ON Signal Boosters
Wilson Product Installation Guide
The Cellular Yagi Explained
Cell Phone Use & Cancer Risk
Extend Cell Phone Battery Life
Cell Phone Booster Repeater Acronyms
Consumer Electronics
Technology News
$311.96
Wilson Amplifiers: Highest Signal Performance, Period..................................................
For Home, Office, Car, Cabin, Boat, Lake House, Warehouse, Military, Multi-Story, Multi-Building, Security System, Voting Machine, Underground Mine & Oil Rig applications.
Click to See How Wilson Beats The Competition
Included: The Wilson 811201 D Direct-Connect Cell Phone Booster System consists of:
How It Works: For incoming calls, the BLACKCAT! Antenna picks up the signal, boosts it and sends it to the amplifier. The amplifier boosts it more and sends it directly to the printed circuit board of the device through the antenna adapter, which by-passes the device’s antenna. For outgoing calls, the sequence is reversed. The system is bi-directional. Your signal is boosted going both ways.
How Far Will It Help? Technically, your signal could be increased to 50 miles. Practacally, hills, trees, buildings, etc. will not allow that to occur. However, we have customers who have called us from drilling vessels over 25 miles offshore, in the Gulf of Mexico, with this system, exactly as it is.
It is used by many of our police and sheriff department customers who patrol remote areas and many of our oil field customers who are down in lowlands, etc.
You simply cannot buy a higher performing direct-connect 3 watt amplifier system. Third party tests continue to verify that.
Features
• 3 watts Output Power (Cell Site Controlled)• Power Control Logic Ensures Maximum Power Output • Provides the Lowest Signal-to-Noise Ratio of Any Direct Connect Amplifier Available• Connects Directly to Cell Phone or Cellular Data Card with a Wilson Antenna Adapter• Works Great on Trucks, Cars, RVs, Boats, Homes, Offices, or Almost Any Other Application• Bi-Directional - Boosts Signal on Incoming & Outgoing Calls• Increases Wattage Of Both 800 MHz & 1900 MHz
Compatible With
CDMA, GPRS, GSM, EVDO, EV-1, HSDPA, PCS, TDMA, UTMS, WCDMA, 1G, 2G, 3G and all other cellular technologies, except Nextel/IDEN.
Specifications
Part Number
811201
Frequency
824-894/1850-1990 MHz
Gain
10 dBi
Max Output Power
3 watts, cell site controlled
Max RF
+35 dBm / +5 dBm
Noise Figure
3.5 dB nominal
Flatness
±2 dB / ±2 dB
Isolation
> 90 dB
Power Requirements
12V, 0.5-1.5A (subject to uplink power)
Connectors
FME-Male 50 ohms
Dimensions
5.5 x 4.3 x 1.4 (inches) or 14.0 x 10.8 x 3.5 (cm)
Weight
NOTE: An Antenna and Antenna Adapter, not included are required. The adapter connects the antenna’s coax cable to the cell phone or Air Card. Purchased separately. It will be added to your shopping cart and will be shipped with the system.
Find your phoneor air card antenna adapte Click Here.
Warranty: We and Wilson Cellular offer a 30 day money-back guaranty plus warranty this product to be free of manufacturer defects that harm operation for one year from purchase and will be exchanged should such a defect occur. Just call us for an RMA # before returning at 214-774-2588 or toll free at 888-713-1243.
BLACKCAT! Antenna Specifications
BC-101
Frequency Range
3 Inch Diameter
Connector
FME Female
Why Wilson?
Our business is solving cellular reception problems, not selling products. We stock only Wilson's products because of the following:
Why UnwiredSignal.com?
Click Here For Extra E-Z Installation Instructions
Questions? Call us at the store in Dallas, TX anytime from 9 AM to 5 PM Monday-Friday. We are happy to help you. 214-774-2588 or toll free 888-713-1243.