| Your Cell Phone Booster - Repeater System Includes:
One Wilson Model 801105 Smart Tech Wireless Amplifier

| Frequency: |
824-894 MHz |
| Gain: |
50 dBi / 50 dBi |
| Connector: |
N Female |
| Dimensions: |
4.5" X 3.5" X 1.25" |
| Power: |
120V A/C to 6V D/C |
| Weight: |
1.5 Lbs. |
One Wilson Model 301123 Inside Dome Antenna

|
Frequency |
806-894 MHz |
| Polarization |
Vertical |
| Connector |
N Female |
| Gain |
5 dBi |
| Impedance |
50 OHMS |
| Ground |
Built-in |
| Diameter |
8 X 2.75 inches |
One Wilson Model 301111 Outside Yagi Antenna
| Frequency: |
806-939 MHz |
|
Polarization |
Horizontal |
| Connector |
N Female |
| Gain |
13 dBi |
| Impedance |
50 OHMS |
| Ground |
Built-in |
| Size |
32.5" |
One Model 759919 Blackcat! Lightning Surge Protector
It protects your amplifier from being damaged by lightning.
Coax Cables
One 30 foot length of super low loss LMR400e coax cable to go from outside antenna to lightning fuse. "N" Male connectors on each end.
One 2 foot length of super low loss LMR400e coax cable to go from lightning fuse to amplifier. "N" Male connectors on each end.
One 20 foot length of super low loss LMR400e coax cable to go from amplifier to inside dome antenna. "N" Male connectors on each end.
Note: System will work without a Lightning Fuse, but we highly recommend it to resist a power surge from traveling through it*.
AT&T customers: AT&T has implemented an "overlay/underlay' network in most or all areas where they broadcast both 800 MHz and 1900 MHz. This means signal strength coming from AT&T for each frequency will vary, depending upon level of usage. If you get a single frequency kit, like this 800 MHz there will likely be times when you get no benefit from it if it becomes "full". To make sure you get a cell phone signal all of the time you need a true dual band cell phone signal booster - repeater, like our 801245 C for 4-6 cell phones/computer air cards in use at the same time, or our 801400. |
How Repeater Systems Work:
For incoming calls, the outside antenna boosts the cell phone signals and sends them to the amplifier. The amplifier then boosts it much more and sends it through the inside antenna which broadcasts it over a given area.
The system is bi-directional, so for outgoing calls the sequence is reversed.
Features:
- Wireless cell phone signals broadcast throughout your building
- Multiple cell phones and/or computer air cards, data cards and modems can be in use at the same time
- Automatically adjusts to insure maximum gain
- It is compatible with CDMA, CDMA2000, EDGE, EVDO, EV-1, GPRS, GSM, HSDPA, TDMA, UTMS, WCDMA and all other cellular and computer air card technologies, except Nextel.
- Dome antenna can usually be placed in attic on top of a dry wall ceiling
- We provide phone consultation before, during and after installation (really)
- View our Nextel cell phone repeater systems.
Cell Phone Signal Projection Estimates: Your 801105 A Cell Phone Repeater System will broadcast a cell phone signal over a much more than 600 ft in diameter, depending upon the current outside cell phone signal strength.
We are happy to calculate this area for you at no charge. If you want this information for price shopping, however, please don't call. You can always save 50 bucks after we've done the work, at sites that don't know how to do it or offer little to no customer service later, if needed.
If they cannot or will not give you clear, experienced, Knowledgeable customer support before you buy, wonder what they will be like after you buy? Our solutions work.
Warranty: 30 Day money-back guarantee and a replacement guarantee against manufacturer's defects for a full year.
Questions? Call us at our store in Dallas, TX, from 9 AM to 5 PM Monday-Friday at 214-774-2588 or toll free 888-713-1243.
Why Wilson Electronics?
- Leadership in wireless technology research, with TWELVE electrical engineers on staff.
- The quality and high performance of their products is unsurpassed. View third party test results.
- They (and we) never quibble about warranties
Why would we sell you anything less?
Your repeater system will arrive at your door within four days as an E-Z Install Kit, with all connections labeled.**
Need longer cable lengths? We have pre-crimped lengths to 200 feet in stock and can ship bulk cable to 500 feet. Call us at the store if you prefer.

|